Luxury Replica Watches

Luxury Replica Watches

Some may feel overwhelmed by the quantity of information you need to know when using luxury Swiss replica watches. To help you with that, we’ve gathered all the information you need and simplified it. Our luxury watches feature different types of mechanisms and winding them can seem complicated. With the right information, it’s not difficult at all. Learn here how to understand a watch and how to wind it.

Understanding the Luxury Replica Watches


Positions For Winding

One of the most significant components of luxury replica watches is the crown. The crown is the main dial or knob on your watch. It is the biggest, center knob to the right of the dial. It is used to set and wind your watch.



Closed position

When you receive your timepiece, the crown will be in the closed position. You can open it by gently pulling it out. You will have to press the crown inwards and turn it clockwise if you want to screw it back into the closed position. We recommend our customers to keep the crown tightly closed when they are not adjusting the date or time. Depending on the movement, there will be some differences. For example, for the quartz watch movement, the crown will be closed. For Kinetic powered watches, it stays closed for winding.


Starting with the watch in the closed position, if you turn the crown counter-clockwise the knob will unscrew, once unscrewed it will pop out. This initial position is for winding. Always wind in a clockwise direction. Note that winding counter-clockwise can damage your watch.

Setting the date

When the clock is ready for winding, we recommend you have to nudge the dial gently outwards. You can do that by pulling with your thumb and forefinger. It is important to note that pulling it all the way out will move it to set the time, not the date. You will have to find the spot to change the date. If your watch doesn’t display the date, there will be no place for adjusting it. When the crown is in the date changing position, it is crucial that you do not force it counter-clockwise. You can damage the mechanism.

Adjusting the time

For adjusting the time, you have to pull the crown out until it stops. This is the final position and it will allow you to change the time.


Chronographs Sketch

Chronographs Sketch

Many of our the watches you will find on Aparadisiac will feature up to 3 sub-dials. These are called chronographs and have timekeeping intervals that range from seconds to hours. To activate the chronographs, you have to push the start/stop buttons. These are located next to the crown. To start it, you have to press the button corresponding to a specific sub-dial, and press it again to stop it.

Quartz versus automatic

The powered quartz watches are those that work with batteries. The automatic watch accuracy or kinetic use the energy of motion to power the watch. An automatic timepiece uses the everyday motion created by the wearer to operate the watch engine and it stores it. Simple gestures such as a handshake or driving will power the watch. If your timepiece stops working, for the quartz ones you need to change the battery. The automatic ones shouldn’t stop, but if they lose a lot of time, you can go to a local jeweler to adjust it using an adjustment screw, just like in the case of an original piece.

Using our luxury replica watches is much easier if you follow this brief guide. We hope you will find it helpful.


Leave a Reply

Your email address will not be published. Required fields are marked *